VSX S
ERIES
G
ETTING
S
TARTED
G
UIDE
10
www.polycom.com/videodocumentation
happening in the meeting. You can also exchange the view shown in the PIP with
that shown in the main screen.
For example, during a call on a single-monitor system, the PIP displays what your
main camera is sending to the far end. (This lets you adjust the camera if you need
to.) If one of the sites in the call shows any type of content, the content appears in
the main part of the screen, and the PIP changes to show the people at the far end.
During a call on a dual-monitor system, when the participants share content, the
monitors show the far end and the content, and the PIP shows the near end.
To show, move, or turn off the PIP during a call:
❑
Press
PIP
to turn the PIP on.
❑
While the PIP has a yellow border, press
PIP
repeatedly move it to a
different corner of the screen.
❑
After a brief pause, the PIP border turns blue. Then, press
PIP
to turn the
PIP off. The PIP setting remains in effect until you change it or the system is
restarted.
To swap the views shown in the PIP and the main screen:
1.
If the PIP is not showing, press
PIP
to turn it on.
2.
Press
Camera
and select the Swap PIP icon.
Controlling the Sound
Adjusting Volume
During a call, you use the remote control to raise or lower the volume of the sound
you hear. Changing the volume affects only the sound you hear at your site.
To adjust the volume:
>>
Press
Volume
.
