background image

SpectraLink 8000 SVP Server: Administration Guide for SIP  

PN: 1725-36033-001_G.doc 

Patent Information 

The accompanying product is protected by 

one or more US and foreign patents and/or 

pending patent applications held by 

Polycom, Inc. 

Copyright Notice 

© 2009 to 2012, Polycom, Inc. All rights 

reserved. POLYCOM®, the Polycom 

"Triangles" logo and the names and marks 

associated with Polycom's products are 

trademarks and/or service marks of 

Polycom, Inc. and are registered and/or 

common law marks in the United States and 

various other countries. All other 

trademarks are property of their respective 

owners. No portion hereof may be 

reproduced or transmitted in any form or 

by any means, for any purpose other than 

the recipient's personal use, without the 

express written permission of Polycom. 
All rights reserved under the International 

and pan-American copyright Conventions.  
No part of this manual, or the software 

described herein, may be reproduced or 

transmitted in any form or by any means, or 

translated into another language or format, 

in whole or in part, without the express 

written permission of Polycom, Inc. 
Do not remove (or allow any third party to 

remove) any product identification, 

copyright or other notices. 
Every effort has been made to ensure that 

the information in this document is 

accurate. Polycom, Inc. is not responsible 

for printing or clerical errors. Information in 

this document is subject to change without 

notice and does not represent a 

commitment on the part of Polycom, Inc.  

Notice 

Polycom, Inc. has prepared this document 

for use by Polycom personnel and 

customers. The drawings and specifications 

contained herein are the property of 

Polycom and shall be neither reproduced in 

whole or in part without the prior written 

approval of Polycom, nor be implied to 

grant any license to make, use, or sell 

equipment manufactured in accordance 

herewith. 
Polycom reserves the right to make changes 

in specifications and other information 

contained in this document without prior 

notice, and the reader should in all cases 

consult Polycom to determine whether any 

such changes have been made. 
NO REPRESENTATION OR OTHER 

AFFIRMATION OF FACT CONTAINED IN 

THIS DOCUMENT INCLUDING BUT NOT 

LIMITED TO STATEMENTS REGARDING 

CAPACITY, RESPONSE-TIME 

PERFORMANCE, SUITABILITY FOR USE, 

OR PERFORMANCE OF PRODUCTS 

DESCRIBED HEREIN SHALL BE DEEMED 

TO BE A WARRANTY BY POLYCOM FOR 

ANY PURPOSE, OR GIVE RISE TO ANY 

LIABILITY OF POLYCOM WHATSOEVER. 

Contact Information 

Please contact your Polycom Authorized 

Reseller for assistance. 
Polycom, Inc. 

4750 Willow Road,  

Pleasanton, CA 94588 

http://www.polycom.com

 

 

Summary of Contents for SpectraLink 020
















































Reviews: