2.
Set
Auto Answer Point-to-Point Video
or
Auto Answer Multipoint Video
to
Do Not Disturb
.
Enable Answering Video Calls Automatically
If your system administrator has allowed access to user settings, you can specify whether to answer
video calls automatically or to have the system announce incoming video calls and wait for you to answer
manually.
Caution:
Automatically answering calls is convenient, but it can create security issues. An
unexpected caller could interrupt a meeting in progress or look at equipment and
notes left in an empty room.
Procedure
1.
Navigate to
Settings
>
User Settings
>
Meetings
.
2.
Set
Auto Answer Point-to-Point Video
or
Auto Answer Multipoint Video
to
Yes.
Mute Automatically Answered Video Calls
If your system administrator has allowed access to user settings, you can choose whether to mute the
audio when automatically answered video calls connect.
This prevents callers from overhearing conversations or meetings.
Note:
If you enable automatic muting during a call, the audio for the current meeting is not
affected.
Procedure
1.
Navigate to
Settings
>
User Settings
>
Meetings
.
2.
Select
Mute Auto Answer Calls
.
After a call connects, press
on the remote control when you're ready to unmute the
microphones.
When a call is muted, this icon
displays on your monitor.
Encryption and Security
When a call is encrypted, a locked padlock
displays on the monitor. If a call is not encrypted, an open
padlock displays on the screen. The padlock icon also displays in the following situations:
▪ If you are in a point-to-point call or a conference call hosted by another system, the padlock icon
displays the state of your individual connection.
▪ If you are hosting a conference call, the padlock icon displays the combined state of all
connections: encrypted if all connections in the call are encrypted, unencrypted if one or more
connections in the call are not encrypted.
In one call, some connections might be encrypted while others are not. However, the padlock icon might
not accurately indicate whether the call is encrypted if the call is cascaded or includes an audio-only
endpoint. If encryption is required on your system, the far-end must support encryption or the call will not
be completed.
Using a Polycom RealPresence Group Series Remote Control
Polycom, Inc.
38
