Polycom ReadiVoice Reference Manual Download Page 301

Page: 301 / 326

Proprietary & Confidential

293

Legacy v. 1.10.0 PSPI Functions

This chapter documents the PSPI functions that maintain backward

compatibility with code developed for ConferenceNow! v. 1.1x.x. If you’re

maintaining code originally developed for v. 1.1x.x, all the PSPI functions you

need are in this one chapter.
You can use the v. 1.10.0 PSPI functions with newer versions of the software to

avoid rewriting your code. However, you can’t access the new options and

features.

To access all the features added since ConferenceNow! v. 1.1x.x, rewrite your

code to use the functions described in

Chapter 2

not,

however, “mix and match” current and legacy functions (or two

different levels of legacy functions, such as v. 2.00.0 and v. 1.20.0). For

instance, don’t use

AddSubAndAN_v2320()

to add subscribers and then try to

update them with the legacy

UpdateSubscriber()

function.

Caution!

If two-password call flow is enabled, then you can’t use any pre-v.2.10.0 stored
procedures except those included in chapters

through

. If your system uses fixed

translation numbers, be aware that pre-v.2.10.0 stored procedures don’t perform
the required external ID validations (see

“If vExternalId is used for translation

numbers…”

on page 18).

Caution!

Polycom authorizes the use of only the stored procedures described in this
publication. Other

.sp

files reside in the ReadiVoice file system; however, those not

included here are designed for Polycom internal use only and may cause
unforeseen problems if used otherwise.

Summary of Contents for ReadiVoice







































































































































































































































































































































Search results

Summary of Contents for ReadiVoice

Reviews:

Related manuals for ReadiVoice

Brands by name

Popular brands

Polycom ReadiVoice, Reference Manual

Search results

Summary of Contents for ReadiVoice

Reviews:

Related manuals for ReadiVoice

Brands by name

Popular brands