Polycom MGC Administrator, Administrator'S Manual

Page: 399 / 584

MGC Administrator’s Guide
6-3
Adding a New Operator to the System
To add a new operator to the system:
1. In the Browser pane of the main window, double-click the name of the
MCU to which you want to add an operator.
A list of options appears below the MCU’s icon.
2. Double-click the MCU Configuration icon, or click the plus [+] icon next
to the MCU Configuration icon to display the cascading list.
A list of configuration options appears below the MCU Configuration
icon.
3. Right-click the Operators icon, and then click New Operator .
The New Operator dialog box opens.
In the Name text box, type the name of the new operator. The name you
specify here is the login name used by the operator when logging into the
system.
4. In the Password text box, type the new operator’s password. The
operator uses this password when logging into the system.
5. In the Group box, select the type of operator you are defining from the
drop-down list.
There are three types of operators:
• Attendant - Can only perform the following tasks:
— Define new conferences, gateway sessions, and meeting rooms
—
Define new participants