Polycom MGC Administrator, Administrator'S Manual

Page: 231 / 584

MGC Administrator’s Guide
4-49
Changing a Data Unit Type
You can designate a unit as a Data Bridge and change the Data Bridge
configuration to a standard Data Unit (participant’s unit).
To change a data unit type:
1. In the Browser pane, click the plus [+] next to the slot containing the
Data module to configure.
2. Right-click the unit to configure.
3. Click the desired option:
— To change the Bridge unit to a standard unit, click the Participant’s
Unit option. The Bridge icon changes accordingly.
— To designate a unit as a Bridge, click the Bridge option.
The unit’s icon changes accordingly.
Listing the Ports for each Data Unit
You can view the list of ports per Data Unit by clicking the Data Unit or Data
Bridge icon.