Polycom MGC Administrator, Administrator'S Manual

Page: 175 / 584

MGC Administrator’s Guide
3-125
Modifying a Network Service
After you finish defining a new Network Service, you may review or edit the
Network Service’s parameters.
To review or edit a Network Service’s parameters:
1. In the Browser pane, connect to the MCU and expand its options tree.
2. Double-click the MCU Configuration icon, to list the configuration
options.
3. Double-click the Network Services icon, or click the plus [+] icon next to
the Network Services icon to expand the list.
A list of Network Service types is displayed below the Network Services
icon.
4. Double-click the appropriate Network Service icon, or click plus [+] icon
next to the appropriate Network Service icon to expand the list of
network service of the selected type.
A list of the Network Services of the selected type defined for the MCU
appears below the
Network Services icon.
5. Right-click the icon of the Network Service to review or edit, and then
click
Properties .
Alternatively, double-click the Network Service icon to display its
properties.