Networks
2 - 23
Configuring Telephony
To configure telephony options:
1.
Go to
System >
Admin Settings > Network > Telephony
.
2.
Configure these settings on the Telephony screen:
To configure the analog phone line (POTS line):
1.
Go to
System > Admin Settings > Network > Telephony
.
Enter the
System Telephone Number
for the analog phone line.
2.
Go to
System > Admin Settings > Network > Call Preference
.
Enable
Analog Phone
.
3.
Go to
System > Admin Settings > Network > Call Preference >
.
Add
Analog Phone
to the Audio Dialing Order on the Network Dialing
screen.
Setting
Description
Room Telephone
Number
Enter the telephone number of the room where the system
is located.
System Telephone
Number
Specifies the analog phone number of the system, including
country and area codes for the system’s location.
Outside Line
Dialing Prefix
Specifies the dialing prefix used to call outside the network.
Summary of Contents for HDX 9004
