manualshive.com logo in svg

Polycom HDX 9004, Administrator'S Manual, Page: 13 / 194

Share
Download
Polycom HDX 9004 Administrator'S Manual Download Page 13

 Introducing the Polycom HDX Systems

1 - 3

To power off the Polycom HDX system:

¾

Press and hold the 

 power button on the remote control for 2 seconds.

¾

Press and hold the power switch on the front of the system for 2 seconds.

The following figure shows the location of the power switch and indicator 
light.

The indicator light on the front of the system provides this information:

Indicator Light

System Status

Off

System is powered off

Steady green light

System is initializing
System is awake and not in a call

Blinking green light (once)

System received an IR signal while 
awake and not in a call

Blinking green light (on 1 sec, off 2 sec)

System is asleep, not in a call

Steady amber light

System is in a call

Blinking amber light (once)

System received an IR signal while in 
a call

Blinking amber light

System is in software update mode
System is in factory restore mode

Rapidly blinking amber light

System is preparing to reset its 
configuration

Summary of Contents for HDX 9004



































































































































































































Reviews:

No comments