Polycom DMA 7000, Getting Started Manual

Page: 7 / 62

Polycom ® DMA ™ System Server Setup
Polycom, Inc. 3
Unpack and Install the Hardware Components
The Polycom DMA system uses either one or two Polycom-branded Dell
servers.
To unpack and install the hardware
1
If you purchased Polycom RMX 2000 conference platforms (MCUs) with
your Polycom DMA system servers, unpack and install them as described
in the
Polycom RMX 2000 Getting Started Guide .
2
Examine the Polycom DMA system shipping containers for damage.
Polycom is not responsible for damage sustained during shipment of this
product.
3
Open and review the container packing slips.
4
Open the containers and examine the contents. A single-node Polycom
DMA system shipment includes:
— 1 Polycom DMA system server
— 2 power cords
— 1 rack-mount kit (four-post)
— 1 bezel key
— 1 server documentation set
— 1 copy of this Polycom DMA System Getting Started Guide
— 1 Polycom DMA system installation disk (included for recovery
purposes; the software on the disk is already installed on the server)
DNS search domains Space- or comma-separated list of fully
qualified domain names to query on the DNS
servers to resolve host names (optional). The
system domain is added automatically; you
don’t need to enter it here.
Time zone Time zone in which the system resides.
NTP server #1 IP address of the primary NTP time server
(optional, but strongly recommended).
NTP server #2 IP address of a second NTP time server
(optional).
NTP server #3 IP address of a third NTP time server
(optional).
System Configuration
Information
My System Values Description