Polycom 1725-16824-001 User Manual Download Page 51

Page: 51 / 210

Customizing Your Phone

2 - 13

Stopping and Disabling a Screen Saver

You can stop a screen saver at any time, and display the idle screen, by tapping

the touch screen. After your phone is idle for the specified period of time, the

screen saver will start again.
You can disable a screen saver (that is, prevent it from starting, even if your

phone has been idle for the specified period of time) by doing the following:

•

Removing the USB flash drive.
The screen saver will not display until you attach the USB flash drive again

(and your phone has been idle for the period of time you specified).

•

Disabling the

Screen Saver

setting. When you disable the setting, the

screen saver will not display, even though the USB flash drive is still

attached.

To disable the Screen Saver setting:

Tap

> Settings

Basic

Preferences

Screen Saver

The Screen Saver screen displays.

Tap the

Screen Saver

field’s highlighted box. From the drop-down list,

tap

Disabled

to disable the screen saver.

Tap the

Save

soft key.

Tap

to return to the idle screen.

Summary of Contents for 1725-16824-001



















































































































































































































Search results

Summary of Contents for 1725-16824-001

Reviews:

Related manuals for 1725-16824-001

Brands by name

Popular brands

Polycom 1725-16824-001, User Manual

Search results

Summary of Contents for 1725-16824-001

Reviews:

Related manuals for 1725-16824-001

Brands by name

Popular brands