Polycom 1725-16824-001 User Manual Download Page 173

Page: 173 / 210

Using the Advanced Features of Your Phone

4 - 17

Recording Calls and Conferences

If the Call Recording and Playback feature is available, and you connect a USB

device to the USB port on your phone, you can record active calls (audio

component only) on your phone. Recordings are stored as

.wav

files on the

USB device. You can record up to four hours in one file. The approximate time

remaining for recording (the free space on the USB device) is shown on the

status bar of the phone screen.
The following figure shows that you have 16.7 hours of free space on your

USB device.

Note

Recording calls is an optional feature that your system may not support. For more
information, contact your system administrator.

When you record a video call, your phone will only record the audio component.

For a list of supported USB devices to record phone audio, see
Technical Bulletin 38084,

Supported USB Devices for SoundPoint IP 650 and 670

and Polycom VVX 1500 Phones,

http://www.polycom.com/support/voice/soundpoint_ip/VoIP_Technical_Bulletins_pu
b.html

Summary of Contents for 1725-16824-001



















































































































































































































Search results

Summary of Contents for 1725-16824-001

Reviews:

Related manuals for 1725-16824-001

Brands by name

Popular brands

Polycom 1725-16824-001, User Manual

Search results

Summary of Contents for 1725-16824-001

Reviews:

Related manuals for 1725-16824-001

Brands by name

Popular brands