12
Configuration and Management
Your VVX D230 system provides the following options to configure and manage your system:
●
System web interface
●
Interactive voice response (IVR) system
●
Remote provisioning
Configure Your D230 With the System Web
Interface
You can access the D230’s system web interface from a PC using a web browser. Although all popular
browsers are tested for compatibility with the system web interface, some inconsistencies may arise from
time to time. Contact
obi.spsupport@polycom.com
if you have any questions about the system web
interface and how it appears in your browser window.
Access the System Web Interface
You can access the system web interface to see settings on your D230 system.
To access the system web interface:
1
Connect your base station to the LAN.
2
Dial
* * *
from the handset to access the
Config Attendant.
3
Choose
1
to hear the IP address of the system read back to you. Write this down.
4
Enter the system IP address in a local PC web browser.
5
When prompted, enter the user name and the password.
The default user name is
admin
, and the default password is
admin
.
Make Changes With the System Web Interface
You can configure and make changes to your D230 system with the system web interface.
You must submit every configuration page after you make changes on the page. Otherwise, those
changes are discarded once you go to another page. Many changes also require you to reboot
the unit. However, you can reboot the unit just once after you make and submit all your changes
on all the pages.