Poly Rove B2 Manual Download Page 1

Page: 1 / 3

Pairing A Poly Rove Handset To A B2 Base

Objective

Pairing a Poly Rove handset to an active B2 Base unit.

Applies To

• Poly Rove B2 Base

• Poly Rove 30 Handset

• Poly Rove 40 Handset

Procedure

Press and hold

the button at the top of the

B2 Base

until it starts blinking green

Updated: Fri, 14 Oct 2022 20:53:18 GMT

Summary of Contents for Rove B2

Page 1: ...plies To Poly Rove B2 Base Poly Rove 30 Handset Poly Rove 40 Handset Procedure 1 Press and hold the button at the top of the B2 Base until it starts blinking green https support 8x8 com equipment devi...

Page 2: ...00 for all Rove devices 4 Press Ok and the handset should register 5 Repeat steps 2 3 until all handsets are registered 6 Press and hold the button at the top of the B2 Base until it STOPS blinking an...

Page 3: ...used on all calls When G722 codec is enabled on the base even if all calls negotiate to G711 codec the maximum number of calls is 9 SRTP cannot be enabled on this device in Admin Console If this feat...