Poly CCX 500 User Manual Download

Page: 88 / 133

Use Personal Photos as Screen Savers

You can enable your phone to display your personal photos on a USB flash drive as a screen saver.

To set up a screen saver of your photos, you must set up certain screen saver settings, place your photos

on a USB flash drive, and attach the USB flash drive to the phone.

The photos you use must have the following file type and size properties:

• File type: BMP, JPEG, or PNG
• Maximum size: 9999 x 9999 pixels

The phone can only display the photos as your screen saver when the USB flash drive is attached to the

phone. You can set up your phone to use a single photo to display or have all photos display in slide-

show style. This is an alternative to setting up a screen saver, and it automatically starts each time your

phone is idle a certain amount of time.

Procedure

Place one or more photos onto a USB flash drive, either in the root directory or in a folder.

Attach the USB flash drive to your phone.

The USB icon

is displayed on the status bar.

Go to

Settings

Basic

Preferences

Select

Picture Frame

Folder

, and enter the name of the folder you placed your photos in on the

USB flash drive.
If you placed the photos in the root directory of your USB flash drive instead of a folder, do not

enter a folder name.

Select

Time Per Image

, and enter the number of seconds you want each photo to display.

You can enter a minimum of 3 seconds and a maximum of 300 seconds. The default is 5 seconds.

Select

Save

If the message “No pictures found” displays after you select

Save

, there are no photos in the

folder you specified or in the root directory. Go back and make sure the information you entered is

correct.

Go to

Settings

Basic

Preferences

Select

Screen Saver

screen and select

Enabled

Select

Wait Time

and enter the number of minutes the phone should wait after no activity before

displaying the screen saver.
Enter a time between 1 and 9999 minutes. The default is 15 minutes.

10.

Select

Save

Your phone displays the screen saver after the number of minutes you specified in the Wait Time

field.

Note:

If your phone doesn’t detect the USB device when you insert it into the USB port, the USB

port on your phone may be disabled. Contact your system administrator for assistance

using the USB port.

Disable the Screen Saver

You can stop a screen saver at any time by touching the screen. After your phone is idle for the specified

period of time, the screen saver starts again.

Poly CCX Phone Settings

Summary of Contents for CCX 500






































































































































Search results

Summary of Contents for CCX 500

Reviews:

Related manuals for CCX 500

Brands by name

Popular brands

Poly CCX 500, User Manual

Search results

Summary of Contents for CCX 500

Reviews:

Related manuals for CCX 500

Brands by name

Popular brands