When enabled, this setting automatically enables your phone to display far-side video in full
screen. When disabled, far-side video is displayed in the smaller Active Call screen.
3.
Select
Save
.
Mixed Audio and Video Calls
Your system displays different options based on the equipment you and your contacts use during a call.
▪ When you are in a call with contacts who have video-enabled phones, the participants’ video
displays onscreen.
▪ For video calls with audio-only contacts, your video stream displays an
Audio
icon with the
number of contacts on audio.
▪ Video always displays in a video call when a contact can send video.
No Video from the Far Side
If the far side stops sending video, a No Video icon is displayed on your phone.
Using a USB Camera with Your Phone
To transmit video during calls, attach a USB camera to your CCX 600 phone.
Note:
If your phone doesn’t detect the USB camera, you may need to ask your administrator to enable
the USB port.
Reference the setup sheet for instructions on attaching the camera to your phone.
After the camera is attached to your phone, a message indicating that your camera firmware is updating
and syncing with your phone displays. Don’t remove the camera during this process.
For assistance verifying that your phone is video enabled and has the latest software installed, check with
your administrator.
Use the Privacy Shutter on the Camera to Stop Sending Video
You can use the privacy shutter on your USB camera to stop transmitting video during a call.
Procedure
»
On the side of the camera lens, rotate the Privacy Shutter Adjuster from the left to the right.
Video Calls
56