necessary to wait for the appliance to cool
and the tank can be filled as needed.
1.3 Close the tank cap.
1.4 Insert the steam lock of
the flexible hose. The steam
gun has a safety button
that
prevents
accidental
start of steam delivery by
children
or
people
unfamiliar with how the
appliance
works.
To
prevent accidental steam delivery push the
button to the OFF position. To restart steam
delivery, push the button to the ON position.
1.5 Connect the cable plug
to an earthed power supply
of the correct voltage.
Completely
unwind
the
power
cable
before
plugging it into the mains
and before use, and always
use the appliance with the
power cable completely unwound.
1.6
Press
the
ON/OFF
switch.
The power indicator light A
will come on.
1.7 Wait for the “steam
ready” indicator light C to
come
on
(approx.
4
minutes). Polti is now ready for use.
2. CONNECTION OF ACCESSORIES
2.1 To attach the extension
hose to the flexible hose
and the floor brush, simply
insert until you hear the
button click indicating that
the accessory is locked in
place.
To
release
the
accessories simply hold the
button down and separate the components.
Before using the accessories, make sure that
they are firmly in place.
2.2 To connect the small
brush,
the
steam
concentrator
or
the
brushes to the flexible hose
or to the extension hoses
insert the accessories and
then turn them until they
are locked in place.
3. STEAM ADJUSTMENT
You can optimise the steam
flow by means of the steam
adjustment knob. You can
increase the steam flow by
turning the control in an
anti-clockwise
direction.
Turning it in a clockwise
direction
reduces
the
steam flow. Here are some suggestions for
the choice of steam flow level:
• Maximum level: for encrusted dirt, stains,
sanitising, grease.
• Medium level: for carpets, rugs, glass, tiles
etc.
• Minimum level: for vaporising plants and
cleaning
delicate
fabrics,
upholstery,
wallpaper, parquet, laminate, etc.
4. CLEANING FLOORS
Before starting to steam clean, it is good
practice
to
have
previously
swept
or
vacuumed the floor.
4.1 Make sure that Section 1 has been
The “steam ready” C indicator light comes
on and goes off during use. This means that
the electrical resistance is working to
maintain constant pressure: it is a normal
phenomenon and you can continue with
your cleaning operations.
When first operating steam, there may be
some drops of water mixed with the steam
due to temperature imbalances.
Direct the first steam jet onto a cloth for a
few seconds.
In case of excessive humidity, reduce the
quantity of steam.
Before using the appliance on delicate
surfaces, ensure that the part in contact
with the surface is free from foreign bodies
that could cause scratches.
| 11 |
E
N
G
L
IS
H
