Polk Mono UMC1, Installation And Operation Manual

Page: 11 / 19

UMC1
9
TUNER OPERATION
Tuner mode options available are Tune, Band, Preset and PTY.
BAND
Select a Band
Press the Band button (6) to change between FM or AM bands.
TUNE
Manual Tuning
Press the Tune button (5). Press the | << or >>| buttons (4, 5) to decrement/
increment stations down/up step by step.
Seek Tuning
Press and hold the | << or >>| buttons to automatically seek the next or previous
strongest broadcast station.
PRESET
Preset mode options available are List, Scan and Autosave.
List
Press the List button (4) to display the preset list . There are 18 FM and 12 AM
preset locations to store your favorite broadcast stations.
•
Store a Station
While tuned to the desired broadcast station, rotate the Encoder Knob (3) to
navigate the preset list and highlight the desired preset memory location.
Press and hold the Encoder Knob for 3 seconds or press the Save soft
button to store the station. The station frequency will appear in the display
adjacent to the preset memory location number.
•
Recall a Station
Rotate the Encoder Knob to navigate the preset list and highlight the
desired preset memory location. Press the Encoder Knob to select and tune
to the corresponding stored station.
Scan
Press the Scan button (5) to scan stations stored in the current band list. The unit
will pause for ten seconds at each preset station. Press Scan again to stop
scanning when the desired station is reached.
Autosave
Press the Autosave button (6) to automatically select strongest stations and store
them in the preset list for the selected Band. The new stations replace any stations
already stored in that band.