Automatically turning on the power
according to the playback of the
playback device (Auto on control
function)
If you turn on the auto on control function and playback is
started by the playback device while this unit is on standby, the
power of this unit is automatically turned on and playback is
started. In addition, if the power is on, the input source is
automatically switched according to the playback of the
playback device. The auto on control function can be set to on
or off for each input source.
1
Switch to the input source you want to set.
2
On the remote control unit, press the button that
corresponds to the input source you want to set for five
seconds or longer.
Input source
Button
TV (HDMI) eARC/ARC
TV
OPTICAL
TV
AUX
AUX
The status LEDs in the display of the current input source blink
three times.
.
Off
On
(Default)
Auto on control
function
[Ex.] Input source:
TV (HDMI) eARC/ARC
0
Even if the auto on control function is on for the optical input or AUX input, the
input source will not switch automatically during HDMI (eARC/ARC) playback.
0
When this unit is in deep standby mode, the auto on control function of
the optical and AUX inputs cannot turn on the unit.
30
