background image

3

Customer Service Hours of Operation: Monday-Friday, 9am-5:30pm est           [email protected]

Important Safety Instructions

This product was designed and manufactured to meet strict 
quality and safety standards. There are, however, some 
installation and operation precautions which you should 
be particularly aware of.
  1. Read Instructions. All the safety and operating instruc-

tions should be read before the system is operated.

  2. Retain Instructions. The safety and operating instructions 

should be retained for future reference.

  3. Heed Warnings. All warnings on the appliances and in 

the operating instructions should be adhered to.

  4. Follow Instructions. All operating and use instructions 

should be followed.

  5. Cleaning. Unplug the appliance from wall outlet before 

cleaning. Do not use liquid cleaners or aerosol cleaners. 
Use a damp cloth for cleaning.

  6. Attachments. Do not use attachments not recommended 

by the product manufacturer as they may cause hazards.

  7. Water and Moisture. Do not use these appliances near 

water: for example, near a bath tub, washbowl, kitchen 
sink, or laundry tub, in a wet basement, or near a swim-
ming pool, and the like.

  8. Accessories. Do not place these appliances on an 

unstable cart, stand, tripod, bracket, or table. The audio/
video products may fall, causing serious injury to a child 
or adult, and serious damage to the products. Use only 
with a cart, stand, tripod, bracket, or table recommended 
by the manufacturer, or sold with the appliances. Any 
mounting of the appliances should follow the manufac-
turer’s instructions, and should use mounting accessories 
recommended by the manufacturer.

  9. Ventilation. Slots and openings in the cabinet are 

provided for ventilation and to ensure reliable operation 
of the appliances and to protect them from overheating, 
and these openings must not be blocked or covered. The 
openings should never be blocked by placing the prod-
ucts on a bed, sofa, rug, or other similar surface. This 
product should never be placed near or over a radiator 
or heat register. This product should not be placed in a 
built-in installation such as a bookcase or rack unless 
proper ventilation is provided or the manufacturer’s 
instructions have been adhered to.

10 . Power Sources. This product should be operated only 

from the type of power source indicated on the marking 
labels. If you are not sure of the type of power supply to 
your home, consult your appliance dealer or local power 
company.

11. Grounding or Polarization. This product is equipped  

with polarized alternating-current line plugs (plugs having 
one blade wider than the other). This plug will fit into  
the power outlet only one way. This is a safety feature. 

    If you are unable to insert the plug fully into the outlet, try  

 reversing the plug. If the plug should still fail to fit, contact 
your electrician to replace your obsolete outlet. Do not 
defeat the safety purpose of the polarized plug.

12. Power Cord Protection. Power-supply cord should be 

routed so that it is not likely to be walked on or pinched 
by items placed upon or against it, paying particular 
attention to cords at plugs, convenience receptacles,  
and the point where they exit from the appliances.

13. Lightning. For added protection for this audio/video prod-

uct during a lightning storm, or when it is left un-attended 
and unused for long periods of time, unplug it from the 
wall outlet and disconnect the antenna or cable system. 
This will prevent damage to the product due to lightning 
and power-line surges.

14. Power Lines. An outside antenna system should not be 

located in the vicinity of overhead power lines or other 
electric light or power circuits, or where it can fall into 
such power lines or circuits. When installing an outside 
antenna system, extreme care should be taken to keep 
from touching such power lines or circuits as contact 
with them might be fatal.

15. Overloading. Do not overload wall outlets and extension 

cords as this can result in a risk of fire or electric shock.

16. Object and Liquid Entry. Never push objects of any kind 

into this product through openings, as they may touch 
dangerous voltage points or short out parts that could 
result in a fire or electric shock. Never spill liquid of any 
kind on this audio/video product.

17. Servicing. Do not attempt to service this product yourself, 

as opening or removing covers may expose you to 
dangerous voltage or other hazards. Refer all servicing  
to qualified service personnel.

18. Damage Requiring Service. Unplug this product from wall 

outlets and refer servicing to qualified service personnel 
under the following conditions:

 

a. When the power supply cord or plug is damaged.

 

b. If liquid has been spilled, or objects have fallen 

 

  into the product.

 

c. If the product has been exposed to rain or water.

 

d. If the product does not operate normally by following 

the operating instructions. Adjust only those controls 
that are covered by the operating instructions, as an 
improper adjustment of other controls may result in 
damage and will often require extensive work by 

 

  a qualified technician to restore the product  

to its normal operation.

 

e. If the product has been dropped or the cabinet  

has been damaged.

 

f. When the product exhibits a distinct change in  

performance this indicates a need for service.

English

Summary of Contents for SurroundBar 2000



















Reviews: