17
GAPID SENSOR
POLITEC | INSTALLATION MANUAL - VER.2.3
12.3 Self-learning function for disqualification
a)
Place the DIP in ON.
b)
Select function number 8 and wait for confirmation from the BLUE LED and buzzer.
c)
Carry out the disturbance to be recorded.Once this disturbance has started, the RED LED will
light up and go off as soon as this disturbance has ended and a double beep will be given to
confirm acquisition.If the RED LED does not light up, it means that the disturbance is too
gentle to be acquired.
d)
Reselect the standard function.
e)
Place the DIP on 1.
It is advisable to carry out a disturbance for no longer than 10 seconds.
12.4 Self-learning function for spontaneous vibration
a)
Place the DIP in ON.
b)
Select function number 9 and wait for confirmation from the BLUE LED and BUZZER.
c)
Carry out the disturbance to be recorded, for example by hitting the fence to cause
oscillation/movement.Once the main movement has been detected, the RED LED will light
up and a double BEEP will be given to confirm the acquisition.If the RED LED does not light
up, it means that the disturbance is too gentle to be acquired.
d)
Carry out the disturbance again.It is necessary to have two consecutive recordings to
confirm the acquisition.If after a few attempts two successful detections are not obtained, it
means that the fence has different oscillation frequencies and it is not possible to use this
function.
e)
Reselect the standard function.
f)
Place the DIP on 1.