Polestar 2 2020, Manual

Page: 279 / 568

Change of target with
cruise control
functions
The driver support systems adaptive cruise con-
trol and Pilot Assist have a change of target
function at certain speeds.
Change of target
If the target vehicle in front suddenly turns then
there may be stationary traffic in front.
When the driver supports are following another
vehicle at speeds below 30 km/h (20 mph) and
changes target vehicle – from a moving vehicle
to a stationary vehicle – the driver supports will
slow down for the stationary vehicle.
Automatic standby mode with change of target
The driver supports are disengaged and set in
standby mode:
• when the speed is below 5 km/h ((3 mph)) and
the driver supports are uncertain whether the
target object is a stationary vehicle or another
object, such as a speed bump.
• when the speed is below 5 km/h ((3 mph)) and
the vehicle ahead turns off so that the driver
supports no longer have a vehicle to follow.
Related information
• Driving support systems (p. 242)
• Adaptive cruise control * (p. 264)
• Pilot Assist * (p. 268)
WARNING
When the driver supports are following
another vehicle at speeds in excess of
approx. 30 km/h (20 mph) and the target
is changed from a moving vehicle to a
stationary vehicle, the driver supports will
ignore the stationary vehicle and instead
accelerate to the stored speed.
• The driver must then intervene him/
herself and brake.
Driver support 279