Polestar 2 2020, Manual

Page: 163 / 568

Using stored position
for seat and rearview
mirrors
If the positions for the power seat and the door
mirrors have been stored, they can be activated
by using the memory buttons.
Using a stored setting
To use a stored position, hold one of the mem-
ory buttons depressed,
1 ( ) or 2 ( ), until the
stored position is reached.
If the memory button is released, the movement
of the seat and door mirrors will be stopped.
Related information
• Front seats (p. 160)
• Power front seat (p. 160)
• Adjusting the power front seat (p. 161)
• Storing a position for seat and door mirrors
(p. 162)
• Adjusting the length of the seat cushion in the
front seat (p. 164)
• Adjusting the lumbar support in the front seat
(p. 164)
• Adjusting the passenger seat from the driv-
er's seat (p. 165)
• Angling adjustment of the door mirrors (p. 151)
WARNING
• Because the driver's seat can be
adjusted with the ignition off, children
should never be left unattended in the
vehicle.
• Movement of the seat can be STOP-
PED at any time by pressing any button
on the power seat control panel.
• Do not adjust the seat while driving.
• Make sure there is nothing under the
seats when they are being adjusted.
Seats and steering wheel 163