Polestar 2 2020, Manual

Page: 128 / 568

Lighting control
The different lighting controls are used to con-
trol both exterior and interior lighting. The left-
hand stalk switch activates and adjusts the exte-
rior lighting. The interior brightness is adjusted
using a thumbwheel on the instrument panel.
Exterior lighting
Rotating ring in the left-hand stalk switch.
When the car is started, the following functions
are available for the rotating ring's different
positions:
Position Specification
Daytime running lights.
Main beam flash can be used.
Daytime running lights and position
lamps.
Position lamps when the car is
parked.
A
Main beam flash can be used.
Dipped beam and position lamps.
Main beam can be activated.
Main beam flash can be used.
Position Specification
Daytime running lights and position
lamps in daylight.
Dipped beam and position lamps in
weak daylight or darkness, or when
the front and/or rear fog lamp is
activated.
The Active main beam function can
be activated.
Main beam can be activated when
dipped beam is switched on.
Main beam flash can be used.
Active main beam on/off.
A If the car is stationary but running, the rotating ring
can be moved to position from another position
to switch on only the position lamps instead of other
lighting.
Polestar recommends that mode is used
when the vehicle is driven.
Thumbwheel in instrument panel
Thumbwheel (to left) for adjusting interior
brightness.
128 Lighting