manualshive.com logo in svg

Poldent Endostar, Instructions For Use Manual, Page: 30 / 40

Share
Download
Poldent Endostar Instructions For Use Manual Download Page 30

29

Instructions for Use  2019-03-20

 

⹅

Disposal of Medical Devices

 

⹅

Service

Maintenance and Inspection Items

Any medical devices which could possibly be contaminated must be first decontaminated by the responsible 

doctor or medical institution and then be disposed of in accordance with local laws and regulations.

The battery should be recycled. Metal parts of the equipment are disposed as scrap metal. Synthetic materials, 

electrical components, and printed circuit boards are disposed as electrical scrap. Material must be disposed 

according to the relevant national legal regulations. Consult specialized disposal companies for this purpose. 

Please inquire of the local administration concerning local disposal companies.

The Endostar Navigator should be repaired and serviced by J. MORITA’s authorized technicians.

Please contact and call Poldent Co. Ltd.’s local dealer for more details.

Warranty

 

⹅

2 Year Limited Warranty

1.  Poldent Co. Ltd. gives a guarantee for two years beginning from the date of purchase. Within this period 

any defect that is due to faulty manufacturing or material will be remedied by repair or replacement at the 

judgment of Poldent Co. Ltd.

2.  Warranty repair and service: in the event of a claim under this warranty, please contact with Poldent Co. 

Ltd.’s local dealer.

3.  In the case of damage caused by wear and tear, careless handling and repairs not carried out by Poldent Co. 

Ltd., the warranty ceases to be valid. This guarantee may not form the basis for any claims for damages, in 

particular not for compensation of consequential damages.  

The buyer assumes responsibility for damage due to dropping of the device, improper use and utilization 

of product and chemicals other than those stated in this instruction manual for cleaning. It is the customer’s 

responsibility to maintain the exact rated voltage indicated at the bottom of the device.

4.  This warranty does not include the external accessories, file electrode or batteries.

Summary of Contents for Endostar









































Reviews:

No comments