Studio Series TTL
Bounce DUA Flash
User Guide
PL150D
Polaroid
and
Polaroid & Pixel
are trademarks of PLR IP Holdings, LLC, used under license. All other
trademarks are the property of the respective owner, who has not sponsored, endorsed or approved
this product. PLR IP Holdings, LLC does not manufacture this product or provide any Manufacturer’s
Warranty or support.
For warranty information and technical support please call
1-800-226-6534 or visit www.polaroid.com
Questions?
Need some help?
These instructions will help you
enjoy your new product
If you still have questions
call our support line:
1-800-226-6534
or visit us at
www.polaroid.com
Distributed by:
C&A Licensing LLC
2 Bergen Turnpike
Ridgefield Park, NJ 07660
© 2011 All Rights Reserved
MADE IN CHINA
Product features, specifications and appearances
are subject to change without notice.
INTRODUCTION
Thank you for purchasing the
Polaroid
studio series TTL
bounce DUA flash. This is an innovative electronic flash
designed for both digital cameras and film cameras. The
features are leading photography into the digital era.
Advanced technology is used in the flash to control the
correct amount of light output. Please kindly take a few
minutes to read the instruction manual before using.
CAUTIONS
• The flash unit does not function on camcorders.
• Misfiring sometimes occurs when the power switch is
turned on and off continuously. If it happens, power off the
flash unit for a few seconds before switching it on again.
The flash unit will then work as normal.
• Do not leave or store the flash unit in temperatures exceeding
40°C/104°F. This might adversely affect the internal structure or
performance of the flash unit. Particularly, do not leave the flash
unit in automobiles during summer.
• Remove the batteries if you do not intend to use the flash
unit for a long period of time.
• The flash unit is not water-resistant. Rain and humid
weather may cause irreparable damages to the flash.
• The flash unit is composed of very delicate electronic
parts. It should be protected against shocks, falls or other
improper
handling.
• The flash unit contains a high voltage condenser. Do not
try to open the housing or repair the flash.
• Do not clean the surface of the flash unit by any petrol,
detergent solution or strong solvents. These solvents may
cause damages to the flash.
Specifications*
Compatibility
C
Canon Digital E-TTL, E-TTL II cameras & E-TTL
film
cameras
N
Nikon Digital TTL, i-TTL cameras & TTL, i-TTL
film
cameras
OP
Olympus & Panasonic Digital TTL cameras
P
Pentax Digital P-TTL & film cameras
S
Sony & Minolta Digital ADI, D Lenses cameras &
TTL
film
cameras
Characteristics
• TTL
metering
• Automatic shutter speed setting
• Flash readiness indication
• Red-eye reduction (Type N, OP and P)
• Front and rear curtain synchronization
• Integrated LED video light
• Power
saving
function
Getting to Know
Your Flash
Mounting Foot
Difference in the position of
indicators and switch at the
rear of C, N, OP, P & S flash
Reflecting Plate
(Optional)
Zoom Head
LED Video Light
Lock Ring
Mounting Foot
Type C, N, P
Type S
Type OP
Type C, N, OP, S
Type P
*Specifications and design are subject to change without prior notice.
Flash
Guide No. (ISO 100)
Flash Head
Bounce Angle
Swivel Angle
Power source
Recycling time
Dimensions
Weight w/o battery
Power
42(m) at 85mm position
28-35-50-85mm
0°, 45°, 60°, 75°, 90°
Right 0° - 90°; Left 0° -180°
Four 1.5V AA size batteries (R6, LR6)
0.5-8 sec.
Approx. 72 (W) x 102 (D) x 130 (H) mm
Approx. 260g
1W X 3
LED Light
ON/OFF Switch
(Main Power /
Flash)
Bounce Angle
Indication
Battery
Compartment
Cover
OK light
ON/OFF Switch
(LED)
Ready Lamp
Test Button
