71
MAINTENANCE
Carburetor
Water/Sediment Trap Service
Most Polaris snowmobiles contain patented carburetor bowl water/sedi-
ment traps located at the bottom of each carburetor. The trap, consisting
of a hose with a plug, should be drained about every 1000 miles (1600
km) and inspected for contamination.
WARNING!
When draining the traps, fuel spillage will occur. Always work in a
well ventilated area away from anything that may cause the fuel to ignite, such
as open flames, sparks, heaters, trouble lights, cigarettes, etc. Review the
gasoline warnings found on page 49.
Plug Cleaning Procedure
1. Turn the fuel valve off.
2. Position a container or shop towels to
catch the contaminated gasoline.
3. Slide the clamp away from the drain
plug and remove the drain plug from the
sediment tube.
4. Wipe residue from the plug and reinstall
it. Reposition and tighten the clamps.
Continue until all the traps have been
emptied.
Clamp
Drain
Plug
Summary of Contents for Widetrack LX
