background image

115

WARRANTY

Service And Warranty Information

Obtaining Service and Warranty Assistance

Read and understand the service data and the Polaris warranty informa-

tion contained in this manual. Contact your Polaris dealer for replace-

ment parts, service or warranty. Your dealer receives frequent updates 

on changes, modifications and tips on snowmobile maintenance, which 

may supersede information contained in this manual. Your dealer is also 

familiar with Polaris policies and procedures and will be happy to assist 

you.
When contacting us about parts, service, or warranty, always provide the 

following information:

1. Serial number
2. Model number
3. Dealer name
4. Date of purchase
5. Details of trouble experienced
6. Length of time and conditions of operation
7. Previous correspondence

Use the page provided near the front of your Owner’s Manual to record 

the identification numbers of your snowmobile and its engine.

Polaris Customer Service

United States: 1-888-704-5290
Canada: 1-204-925-7100

Summary of Contents for Trail RMK






































































































































Reviews: