Polaris Trail Boss 9921784 Page 85 Owner'S Manual Download

Page: 85 / 120

MAINTENANCE

Lights

Taillight/Brakelight

Lamp Replacement

1. Remove the taillight lens cover

mounting screws. Remove the
lens cover and gasket and set
aside for reassembly.

2. Remove the lamp.

3. Apply dielectric grease to the

socket and install the new lamp.

4. Test the taillight/brake light for

proper operation.

5. Reinstall the gasket and lens cover.

Indicator Lamp Replacement

1. Remove the instrument panel or front cover, if necessary, to access

the back of the indicator panel.

2. Using a small, straight-blade screwdriver, turn the base of the bulb

1/4 turn counterclockwise.

3. Using a needle-nose pliers or similar tool, pull the lamp out of the

indicator panel housing.

4. Insert the new bulb and seat it by turning it 1/4 turn clockwise.

5. Reinstall the instrument panel or front cover.

Lamp

Summary of Contents for Trail Boss 9921784

























































































































Search results

Summary of Contents for Trail Boss 9921784

Reviews:

Related manuals for Trail Boss 9921784

Brands by name

Popular brands

Polaris Trail Boss 9921784, Owner'S Manual

Search results

Summary of Contents for Trail Boss 9921784

Reviews:

Related manuals for Trail Boss 9921784

Brands by name

Popular brands