Polaris Sportsman Touring 570 EPS 2018 Owner'S Manual Download | Manualshive

Page: 90 / 176

background image

SHOCK LOADING

WARNING

Your winch cable is very strong but it is NOT designed for dynamic, or “shock”

loading. Shock loading may tension a winch cable beyond its strength and

cause the cable to break. The end of a broken winch cable under such high

loading can cause SEVERE INJURY or DEATH to you and other bystanders.

Winch cables are designed to NOT absorb energy. This is true of both wire-rope
and synthetic-rope winch cables.

1. Never attempt to “jerk” a load with the winch. For example, never take up

slack in the winch cable by moving the winching vehicle in an attempt to
move an object. This is a dangerous practice. It generates high winch cable
loads that may exceed the strength of the cable. Even a slowly moving
vehicle can create large shock loads in a winch cable.

WARNING

SEVERE INJURY or DEATH can result from a broken winch cable.

2. Never quickly turn the winch ON and OFF repeatedly (“jogging”). This puts

extra load on the winch, winch cable, and generates excessive heat from the
motor. This is a form of shock loading.

3. Never tow a vehicle or other object with your winch. Towing an object with a

winch produces shock loading of the cable even when towing at slow
speeds. Towing from a winch also positions the towing force high on the
vehicle. This can cause instability of the vehicle and possibly lead to an
accident.

4. Never use recovery straps with your winch. Recovery straps are designed to

stretch and can store energy. This stored energy in the recovery strap is
released if a winch cable fails making the event even more hazardous.
Similarly, never use elastic “bungie” cords for winching.

5. Never use the winch to tie down a vehicle to a trailer or other transportation

vehicle. This type of use also causes shock loading that can cause damage
to the winch, winch cable, or vehicles used.

Your winch cable is designed and tested to withstand the loads produced
by the winch motor when operated from a stationary vehicle. Always
remember that the winch and winch cable are NOT designed for shock
loading.

88

«
...
88
89
90
91
92
...
»

Summary of Contents for Sportsman Touring 570 EPS 2018

















































































































































































Reviews:

No comments

Related manuals for Sportsman Touring 570 EPS 2018

Raider Classic 250

Brand: Dazon Pages: 98

Brand: Yamaha Pages: 26

Brand: Yamaha Pages: 130

Brand: Yamaha Pages: 116

Brand: Yamaha Pages: 120

Brand: Yamaha Pages: 154

Brand: Yamaha Pages: 160

Brand: Yamaha Pages: 162

Brand: Yamaha Pages: 184

Brand: Yamaha Pages: 328

Brand: Yamaha Pages: 409

Sportsman 9921309

Brand: Polaris Pages: 145

Engine Drive AY20

Brand: Miller Electric Pages: 2

Brand: Polaris Pages: 68

Brand: Huansong Pages: 361

Brand: Kellfri Pages: 12

Brand: Metal-Fach Pages: 32

Cushman Shuttle 4 ELiTE 2020

Brand: Textron Specialized Vehicles Pages: 64

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands