Polaris Sportsman Touring 570 EPS 2018 Owner'S Manual Download

Page: 54 / 176

SERVICE HOURS

1. Press and hold the MODE button to enter the Options Menu.

NOTE

“OPTIONS” will display on the screen for 3 seconds before showing first menu

item

2. Select “Service Hours” from the Options Menu by pressing the MODE button.

Reference the image shown above:

Press the MODE button.

Toggle the Up/Down Buttons to change the units (0, 5, 10, - 95,100)

With the correct unit displayed, Press the mode button which will set

the unit and return to the Options Menu.

NOTE

To reset service hours after they have counted down to "0.0" reselect the

existing setpoint or select a new service hour value.

3. To exit the Options Menu the user can select Exit Menu function from

Options Menu, can hold Mode Button and exit out of Options Menu, or not
press any button for 10 seconds, which will exit out of the Options Menu.

FEATURES AND CONTROLS

Summary of Contents for Sportsman Touring 570 EPS 2018

















































































































































































Search results

Summary of Contents for Sportsman Touring 570 EPS 2018

Reviews:

Related manuals for Sportsman Touring 570 EPS 2018

Brands by name

Popular brands

Polaris Sportsman Touring 570 EPS 2018, Owner'S Manual

Search results

Summary of Contents for Sportsman Touring 570 EPS 2018

Reviews:

Related manuals for Sportsman Touring 570 EPS 2018

Brands by name

Popular brands