Polaris Sportsman Touring 570 EPS 2018 Owner'S Manual Download

Page: 108 / 176

FOOTWELL/FOOTWELL SUPPORT REMOVAL (2-UP
MODELS)

To remove the footwell, do the following:

1. Remove the six screws on the bottom of the footwell.

2. Use a flat screwdriver to remove the plastic rivets securing the footwell to the

fenders.

3. Remove the footwell.

4. If removing the footwell support is necessary to access the clutch cover,

remove the hex flange screw securing the support to the frame.

TIRES

WARNING

Operating your ATV with worn tires, improperly inflated tires, non-standard tires

or improperly installed tires will affect vehicle handling and could cause an

accident resulting in serious injury or death. Always follow all tire maintenance

procedures as outlined in this manual and on the labels on the vehicle. Always

use original equipment size and type when replacing tires.

Refer to the specifications section for recommended tire type, size and pressure.

TIRE TREAD DEPTH

Always replace tires when tread depth
is worn to 1/8” (3 mm) or less.

106

MAINTENANCE

Summary of Contents for Sportsman Touring 570 EPS 2018

















































































































































































Search results

Summary of Contents for Sportsman Touring 570 EPS 2018

Reviews:

Related manuals for Sportsman Touring 570 EPS 2018

Brands by name

Popular brands

Polaris Sportsman Touring 570 EPS 2018, Owner'S Manual

Search results

Summary of Contents for Sportsman Touring 570 EPS 2018

Reviews:

Related manuals for Sportsman Touring 570 EPS 2018

Brands by name

Popular brands