Polaris RZR XP 1000 EPS 2019 Owner'S Manual Download

Page: 64 / 194

3. Never carry more than one passenger in a 2-seat vehicle. Never carry more

than three passengers in a 4-seat vehicle. Never allow a passenger to ride in
the cargo box.

4. Engine exhaust fumes are poisonous. Never start the engine or let it run in

an enclosed area.

5. Never operate with accessories not approved by POLARIS for use on this

vehicle.

6. Operate this vehicle off-road only. Never operate the vehicle on pavement or

on any public street, road or highway, including dirt and gravel roads.

7. Drive in a manner appropriate for your skills and operating conditions. Never

operate at excessive speeds. Never attempt wheelies, jumps, or other
stunts. Keep both hands on the steering wheel during operation.

8. Never consume alcohol or drugs before or while operating this vehicle.

9. Always use the size and type of tires specified for your vehicle. Always

maintain proper tire pressure.

10. Never operate a damaged vehicle. After any rollover or accident, have a

qualified service dealer inspect the entire machine for possible damage.

11. Never operate the vehicle on a frozen body of water unless you have first

verified that the ice is sufficiently thick to support the weight and moving force
of the vehicle, you and your passengers, and your cargo, together with any
other vehicles in your party.

12. Do not touch hot exhaust system components. Always keep combustible

materials away from the exhaust system.

13. Always remove the ignition key when the vehicle is not in use to prevent

unauthorized use.

STARTING THE ENGINE

NOTICE

Operating the vehicle immediately after starting could cause engine damage.

Allow the engine to warm up for several minutes before operating the vehicle.

1. Position the vehicle on a level surface outdoors or in a well- ventilated area.

2. Sit in the driver's seat and fasten the seat belt. Always make sure all cab

doors are closed and latched when riding in this vehicle.

3. Place the transmission in PARK.

4. Apply the brakes. Do not press the throttle pedal while starting the engine.

OPERATION

Summary of Contents for RZR XP 1000 EPS 2019



































































































































































































Search results

Summary of Contents for RZR XP 1000 EPS 2019

Reviews:

Related manuals for RZR XP 1000 EPS 2019

Brands by name

Popular brands

Polaris RZR XP 1000 EPS 2019, Owner'S Manual

Search results

Summary of Contents for RZR XP 1000 EPS 2019

Reviews:

Related manuals for RZR XP 1000 EPS 2019

Brands by name

Popular brands