Polaris RZR PRO XP 2020, Service Manual, Page: 563 / 598

12
9850068 R01 - 2020-2021 RZR PRO XP / XP 4 Service Manual
© Copyright Polaris Industries Inc.
12.27
CHARGING PROCEDURE
If battery voltage is 12.6 Vdc or less, the battery may
need recharging. When using an automatic charger, refer
to the charger manufacturer’s instructions for recharging.
Do not exceed 6 amps when charging the battery.
NOTICE
Charge the battery using an automatic charger that will
not exceed 14.6 Vdc. An automatic charger will signal
when charging is complete.
Allow the battery to stand disconnected for at least 1-2
hours after being properly charged. If the voltage drops
below 12.6 volts, charging was ineffective or the battery
needs to be replaced.
WARNING
An overheated battery could explode, causing severe
injury or death. Always watch charging times carefully.
Stop charging if the battery becomes very warm to the
touch. Allow it to cool before resuming charging.
STATE OF
CHARGE
VOLTAGE
(DC)
ACTION
CHARG-
E TIME
100%
12.8 or
more
None, check
again in 3
months
None
Required
75% -
100%
12.6 - 12.8
May need
slight charge
3 - 6 hrs
50% - 75% 12.3 - 12.6
Needs
Charge
5 - 11 hrs
25% - 50% 12.0 - 12.3
Needs
Charge
At least
13 hrs
0% - 25% 12.0 or less
Needs
Charge
At least
20 hrs
NOTICE
Follow the charger instructions supplied by the
manufacture regarding the order or connections, switch
positions and when to connect the charger to an outlet.
ELECTRICAL