Polaris RZR PRO XP 2020, Service Manual, Page: 280 / 598

5.20
9850068 R01 - 2020-2021 RZR PRO XP / XP 4 Service Manual
© Copyright Polaris Industries Inc.
2. Retain vent line to the purge line with a zip tie
e
.
3. Route vent line into the carbon canister
r
.
4. Route vent line
t
from the carbon canister to the
canister filter
y
.
5. Route vent line
u
up from the canister filter and
attach to two retaining clips
i
.
6. Route vent line back along the left shock support tube
and attach to the fitting in the frame
o
.
VENT LINE TERMINATION FITTING
This fitting should be inspected and tested using a Mity
Vac™ to ensure proper venting. Connect the Mity Vac to
the fitting and give it 5 pumps. The gauge should return
to 0 immediately or there is an obstruction.
NOTICE
If the vent line fitting is removed from the frame, it must
be replaced. The ears on the clip ( arrows ) will not hold
properly once it is removed.
EFI / FUEL SYSTEM