Polaris RZR Pro R 2022, Owner'S Manual

Page: 101 / 195

1. Position the vehicle on a
level surface.
2. Remove the fill plug using an
8 mm Allen wrench.
3. Check the fluid level.
4. Add the recommended fluid
(listed in the Gearcase
Specification Chart). Do not
overfill.
5. Reinstall the fill plug. Torque
to specification.
FLUID CHANGE
The drain plug
w
is located on the bottom of the rear gearcase.
1. Remove the fill plug using an
8 mm Allen wrench.
2. Place a drain pan under the
drain plug.
3. Remove the drain plug. Allow
the fluid to drain completely.
4. Clean the drain plug.
5. Reinstall the drain plug.
Torque to specification.
6. Add the recommended fluid (listed in the Gearcase Specification Chart). Do
not overfill.
7. Reinstall the fill plug. Torque to specification.
8. Check for leaks. Discard used fluid properly and clean any excess oil
residue.
GEARCASE SPECIFICATION CHART
Use of other fluids may result in improper operation of components. See the
Polaris Products section for the part numbers.
99
MAINTENANCE