9926813 R04 - 2013-2016
RZR
570 Service Manual
© Copyright Polaris Industries Inc.
7.29
GEARCASE REMOVAL
1.
Stop engine and place gear selector in Park.
2.
Refer to Front Drive Shaft Removal, page 7.11 and
remove both front drive shafts from the front
gearcase.
3.
Remove the propshaft from the front gearcase. (see
Chapter 7 – PROPSHAFT SERVICE, page
).
4.
Disconnect the wire harness above the front
gearcase and remove the harness from the retaining
dart.
5.
Remove the vent line from the front gearcase.
6.
Remove the four bolts securing the front gearcase to
frame.
7.
Remove the gearcase from the front LH wheel well
area and slide it between the upper and lower A-arm.
