Page 2
English
THANK YOU FOR PURCHASING THE POLARIS CLEANER.
YOUR POLARIS ROBOTIC CLEANER HAS BEEN DESIGNED AND MANUFACTURED TO BE EASILY INSTALLED
AND TO PROVIDE LOW MAINTENANCE OPERATION. PRIOR TO INSTALLING YOUR NEW POLARIS CLEANER,
PLEASE DO THE FOLLOWING:
1)
Complete and return the warranty registration card.
2)
Record your purchase information on the spaces provided below.
3)
Attach your invoice (or a copy) to this page.
Taking these steps will help ensure prompt warranty service, should it be required. If service is required, please
contact your original dealer. If the original dealer does not perform warranty service, please visit
www.polarispool.com to locate an independent service company near you. If you are unable to locate a service
company, please call our Technical Support department at 1-800-822-7933.
RECORD YOUR POLARIS CLEANER DATA HERE:
Date of Purchase
Purchased From Serial Number:
(located
on
machine
head)
City
State/Province
Zip/Postal Code
Table of Contents
Section 1. Important Safety Instructions ........ 3
Section2. CleanerSpecifications ................... 4
Section 3. Assembly and Setup ...................... 4
3.1 Unpacking .......................................................... 4
3.2 Connecting to a Power Source ........................... 4
Section 4. Operation ......................................... 5
4.1 Cleaner Control Unit ........................................... 6
4.2 Submerging the Cleaner .................................... 6
4.3 Starting the Cleaner ........................................... 7
4.4 Wall Climbing (Surface Control System
™
) ......... 8
4.5 Stopping the Cleaner and Removing
from the Pool ...................................................... 8
4.6 Cleaning the Filter Canister ................................ 9
4.7 Storing the Cleaner ......................................... 10
Section 5. Maintenance .................................. 10
5.1 Avoid Cord Tangling ......................................... 10
5.2 Check for Brush Wear .......................................11
5.3 Replacing the Tracks ........................................ 12
Section 6. Replacement Parts ....................... 12
Section 7. Troubleshooting ........................... 12
7.1 Using the Cleaner Error Indicator ..................... 12
7.2 General Troubleshooting .................................. 13
Summary of Contents for robotic NEO EM27 Series
Page 15: ...Page 15 English NOTES ...
Page 31: ...Page 31 Français NOTES ...
Page 47: ...Página 47 Español NOTAS ...
