manualshive.com logo in svg

Polaris RANGER Diesel 2013, Owner'S Manual For Maintenance And Safety, Page: 10 / 97

Share
Download
Polaris RANGER Diesel 2013 Owner'S Manual For Maintenance And Safety Download Page 10

6

SAFETY

Safety Labels and Locations

Warning labels have been placed on the vehicle for your protection. Read and follow the 
instructions of the labels on the vehicle

 

carefully. If any of the labels depicted in this manual 

differ from the labels on your vehicle, always read and follow the instructions of the labels 

on the vehicle

.

If any label becomes illegible or comes off, contact your POLARIS dealer to purchase a 
replacement. Replacement 

safety

 labels are provided by POLARIS at no charge. The part 

number is printed on the label.

Clutch Cover Warning

WARNING

• Moving parts hazard under belt-clutch guard. To prevent serious injury, do not operate vehicle with 

guard removed.

• Do not modify engine or clutch. Doing so can cause part failure, possible imbalance, and excessive 

engine RPM which can result in serious injury or death.

7175488

Clutch Cover

Warning

Discretionary 

Warning

Age 16 

Warning

Shift 

Caution

Summary of Contents for RANGER Diesel 2013


































































































Reviews:

No comments