Polaris RANGER 1000 2020, Service Manual, Page: 327 / 610

6
9850045 R01 - 2020-2021 RANGER 1000 Service Manual
© Copyright Polaris Inc.
6.19
BUSHING INSPECTION
• Inspect the Teflon® coating on the Moveable Sheave
bushing and Drive Clutch Cover Bushing Inspect for
signs of wear, grooving or cracking. De-glaze sheave
surfaces with a 3M Scotch-Brite™ Pad if needed.
NOTICE
Replace the bushing(s) if more brass than Teflon® is
visible on the bushing(s). Refer to Bushing Service.
ROLLER REPLACEMENT
IMPORTANT
When replacing rollers, install new roller pins and thrust
washers.
1. Remove the roller buttons. Inspect and replace if
excessively worn.
2. Press the roller pin out using a correctly sized punch
and commercial press to remove the roller.
3. Install the new roller and thrust washers
w
and press
in a new roller pin using a commercial press and
correctly sized punch.
4. Install the roller buttons and verify smooth operation
of the roller.
PVT SYSTEM