Polaris RANGER 1000 2020, Service Manual, Page: 159 / 610

3
9850045 R01 - 2020-2021 RANGER 1000 Service Manual
© Copyright Polaris Inc.
3.7
VALVE LASH - TAPPET SELECTION
A 440 tappet means the thickness of the tappet is 4.40
mm. Part Number: 5139458-XXX (X’s represent 3 digit
tappet size)
An Engine Valve Lash Adjustment calculator has been
created and is located under Service and Warranty –
News, Forms and Links.
Click or go to
https://www.polarisdealers.com/files/
ServWarr/English/Engine%20Valve%20Adjustment%
20Calculator.pdf
The proper valve tappet may also be obtained by
completing these steps:
IMPORTANT
The Valve Lash Specification and Measured Valve lash
must be calculated in millimeters (mm)
1. Subtract the actual valve lash on the engine from the
valve lash specification (i.e. 0.29 mm – 0.20 mm) =
0.09 mm.
2. Divide the 3 digit tappet number by 100 (i.e. 450 /
100) = 4.5 mm.
3. Add the results of step 1 and step 2 (i.e. 0.09 mm +
4.5 mm) = 4.59 mm.
4. Multiply that answer by 100 to obtain the correct new
tappet (i.e. 4.59 mm x 100 = 459).
5. Refer to the table below to find the closest available
tappet size to the result from step 4 (i.e. 459 should
be rounded to 460 since there is a 460 tappet).
AVAILABLE TAPPETS
3-
22
3-
25
3-
28
3-
30
3-
32
3-
35
3-
38
3-
40
3-
42
3-
45
3-
48
3-
50
3-
52
3-
55
3-
58
3-
60
3-
62
3-
65
3-
68
3-
70
3-
72
3-
75
3-
78
3-
80
3-
82
3-
85
3-
90
3-
92
3-
95
3-
98
4-
00
4-
02
4-
05
4-
08
4-
10
4-
12
4-
15
4-
18
4-
20
4-
22
4-
25
4-
28
ENGINE / COOLING / EXHAUST