Polaris PRO XD Page 81 Owner'S Manual Download

Page: 81 / 182

PARKING THE VEHICLE

To park the vehicle, do the following:

1. Apply the brakes. Stop the vehicle on a level surface.

2. When parking inside a garage or other structure, be sure that the structure is

well ventilated and that the vehicle is not close to any source of flame or
sparks, including any appliance with pilot lights.

3. Place the transmission in PARK.

4. Turn the engine off.

5. Slowly release the brake pedal and make sure the transmission is in PARK

before exiting the vehicle.

6. Remove the ignition switch key to prevent unauthorized use.

PARKING ON AN INCLINE

Avoid parking on an incline if possible. If it's unavoidable, follow these
precautions:

1. Apply the brakes.

2. Place the transmission in PARK.

3. Turn the engine off.

4. Slowly release the brake pedal and make sure the transmission is in PARK

before exiting the vehicle.

5. Block the rear wheels on the downhill side.

OPERATION

Summary of Contents for PRO XD























































































































































































Search results

Summary of Contents for PRO XD

Reviews:

Related manuals for PRO XD

Brands by name

Popular brands

Polaris PRO XD, Owner'S Manual

Search results

Summary of Contents for PRO XD

Reviews:

Related manuals for PRO XD

Brands by name

Popular brands