Polaris PRO XD Owner'S Manual Download Page 44

Page: 44 / 182

INSTRUMENT CLUSTER

OVERVIEW

NOTICE

The use of a high pressure washer may damage the instrument cluster. Wash

the vehicle by hand or with a garden hose using mild soap. Do not use alcohol

to clean the instrument cluster. Do not allow insect sprays to contact the lens.

Immediately clean off any gasoline that splashes on the instrument cluster.

DISPLAY AREA

FUNCTION

Gear Indicator

H = High Gear
L = Low Gear
N = Neutral
R = Reverse Gear
P = Park
– = Gear Signal Error (or shifter between gears)

Display Area 2

This area displays odometer, trip meter, trip meter 2,
voltage, engine temperature, engine hour meter,
programmable service hour interval, ground speed, or
engine RPM.

Display Area 1

This area displays engine RPM, ground speed, or
coolant temperature.

FEATURES AND CONTROLS

Summary of Contents for PRO XD























































































































































































Search results

Summary of Contents for PRO XD

Reviews:

Polaris PRO XD, Owner'S Manual, Page: 44 / 182

Search results

Summary of Contents for PRO XD

Reviews: