Polaris Outlaw 500, Service Manual

Page: 10 / 202

1.7
GENERAL INFORMATION
1
Special Tool Listing
Special Tools may be required while servicing your machine.
Some of the tools listed are mandatory and other tools may be
substituted with a similar tool, if available. Tools shown may not
apply to a particular vehicle. Polaris recommends the use of
Polaris special tools when servicing any Polaris product.
Standard Tools and Engine Tools
PU-45432 - Caliper or A Basic Caliper
Basic Micrometer
PA-46502 - Valve Spring Compressor
PA-46087 - Crankcase Separator
PA-46075 - Flywheel Puller
PA-45958 - Cam Chain Tensioner Tool
Standard Tools and Engine Tools
2870569 - Crankshaft True Ki t
2870386 - Piston Pin Puller
PA-46076 Mag End Crank Nut Remover/Install
PA-46077 - Mag End Crankshaft Installer
PV-43527 Oil Filter Wrench
5131135 - Water Pump Install Tool
2870390 - Piston Support Block