Polaris MATRIX 650 INDY VR1 129, Owner'S Manual

Page: 98 / 243

RIDING WITH A GROUP
1. Tap the handle by the group name
w
to minimize the panel and show more
map.
2. After 10 seconds of not interacting with the screen, the map controls will
disappear. Tap the screen to make them visible again.
3. Tap on a rider icon in the ride group panel to show that rider relative to your
location. If center-on-me is enabled, the display reverts to the centered state
after 10 seconds.
CREATING A RIDE GROUP
To create a Ride Group, do the following:
1. On the Group Ride Panel, tap the “New Group” button
e
to create a group
for others to join.
2. Give the group a name and choose whether a passcode should be required
for others to join the group. If the “Private” toggle is tapped, you will be
prompted to enter a four-digit passcode.
96
RIDE COMMAND DISPLAY