Polaris MATRIX 650 INDY VR1 129, Owner'S Manual

Page: 66 / 243

1. Press and release the Select button
q
to select which smartwarmer to
customize: grips or thumb. Press the
Select button to select.
2. Press and release the Down Arrow
e
to choose a heat level: low,
medium, or high. Press the Select
button to select.
1. Use the Up and Down arrows to increase/decrease the temperature to
desired setting.
• UP increases
w
the temperature.
• DOWN arrow
e
decreases the temperature.
2. Press the Select Button to lock in temperature.
3. Press the Down arrow to advance to the next heat setting.
4. Repeat steps 3-5 for each setting: low, medium, and high.
5. Press the Select Button to exit.
6. Press the SET or Polaris button on the gauge to exit. The grips will adjust to
the temperatures of the new settings when the hand grip warmers are
enabled.
ENGINE OVERHEAT INDICATOR
The over-temperature indicator on
the standard instrument cluster will
illuminate when the engine is
overheating. Take action to cool the
engine. See . The indicator will
flash
when engine temperature reaches
critical levels.
Stop the engine
immediately.
FLASHING INDICATOR
Flashing indicators indicate continued operation could result in serious engine
damage. The engine management system will automatically reduce engine
power and create a misfire condition. Stop the engine
immediately . Allow the
engine to cool down.
64
FEATURES