Polaris MATRIX 650 INDY VR1 129, Owner'S Manual

Page: 105 / 243

PIN ACTIVATED SECURITY SYSTEM (IF
EQUIPPED)
NOTICE
The P.A.S.S. feature must be activated by your dealer using Polaris Digital
Wrench. See your dealer for setup and activation.
The Pin Activated Security System (P.A.S.S.) allows you to safely lock and
unlock your vehicle from the Ride Command display screen.
ENABLE P.A.S.S.
1. Go the settings menu by pressing the Polaris button followed by the All
Settings button.
2. Select Vehicle Settings from the left toolbar.
3. Select Passcode Unlock.
4. If this your first time activating P.A.S.S. you will be prompted to enter a new
pin. Enter and verify new pin.
5. Turn off the vehicle using the key ignition switch.
NOTICE
After activating P.A.S.S. for the first time you must power down the vehicle and
allow the ECM fully shutdown before restarting. This may take up to three
minutes.
DISABLE P.A.S.S.
1. Go the settings menu by pressing the Polaris button.
2. Select Vehicle Settings from the left toolbar.
3. Select Passcode Unlock.
4. Enter pin code to disable P.A.S.S.
103
RIDE COMMAND DISPLAY