Polaris 850 PRO-RMK 155 2.6" QD 2021, Manual

Page: 92 / 747

1.86
9850060 R02 - 2020-2021 850 AXYS™ Long Track Snowmobile Service Manual
© Copyright Polaris Inc.
DIGITAL WRENCH SOFTWARE VERSION /
UPDATE ID
Always use the most current version of the Digital
Wrench software to ensure you have the latest updates
or enhancements. New reprogramming files and guided
diagnostic procedures are added to these updates as
they become available.
Knowing what Digital Wrench version and update is
installed will help determine which updates are required.
NOTICE
Versions and updates are subject to change.
1. Open the Digital Wrench software. Locate the version
ID shown on the lower right side of the Digital
Wrench® start-up screen.
2. Proceed to http://polaris.diagsys.com to see if a
newer update is available.
3. If a newer update is available, it should be
downloaded before using Digital Wrench.
DIGITAL WRENCH – UPDATING SOFTWARE
Updates are released for Digital Wrench via the Internet
at:
http://polaris.diagsys.com . The Digital Wrench
website can also be accessed through the dealer website
at:
www.polarisdealers.com .
NOTICE
Only authorized Polaris dealers and distributors can
access the dealer website.
1. Log on to www.polarisdealers.com .
2. Locate the “ Service and Warranty ” drop-down
menu.
3. Click on “ Digital Wrench Updates ”.
4. The Digital Wrench portal website should appear in a
new web browser.
5. Click on “ Digital Wrench Version Updates ”.
NOTICE
You must already have the current version installed
before adding an update. Updates will not install if you
are using an older version loaded on your PC.
6. If the update file date listed is newer than your
current version and update, see Chapter 4 to
download the file.
GENERAL INFORMATION