background image

10

SAFETY

Operator Safety

Stay Clear of Track

Your snowmobile is propelled by a revolving track that must be partially 
exposed for proper operation. Do not stand on the plastic flap.

WARNING!

Serious injuries may result if 

hands, feet, or clothing become entangled 
in the track. Be alert when riding, and 
remain properly seated to stay clear of the 
track. Never hold the snowmobile up or 
stand behind it while warming up the track. 
A loose track or flying debris could cause 
serious injury or death. We recommend 
having your dealer perform all track service 
and alignment procedures.

Stay Clear of Engine

Never attempt adjustments with the engine running. Turn off the 
ignition, open the side panels or hood, make the adjustment, secure 
shields and guards, secure the side panels and hood, and then restart the 
engine to check its operation.

WARNING!

Serious injury can occur if fingers or clothing contact the moving 

parts of an engine. Always stop the engine before attempting adjustments.

Riding Position

Operating a snowmobile requires skill and balance for proper control. 
Rider positions may vary with experience and the features available on 
some snowmobiles, but under many conditions, the proper position is to 
be seated with both feet on the running boards and both hands on the 
handlebar grips for proper throttle, brake and steering control.

WARNING!

Improper riding position may reduce control and could result in 

serious injury or death. Always ride in a position that allows for control of your 
vehicle.

NO STEP

Summary of Contents for 600 Switchback Assault








































































































































Reviews: