background image

5

INTRODUCTION

Important Notes for Owners and Drivers

After reading this manual, store it in the snowmobile for convenient 
reference. It should remain with the snowmobile when the snowmobile 
is sold.

Some of the illustrations and photos used in this manual are general 
representations. Your model may differ.

Follow the maintenance program outlined in this manual. Preventive 
maintenance ensures that critical components of the snowmobile are 
inspected by your dealer at specific mileage intervals.

You and your dealer must complete the registration form included with 
your snowmobile and forward it to us. This completed form is necessary 
to ensure warranty coverage.

Protect and preserve your right to ride by joining your local trail riding 
clubs.

When teaching inexperienced operators to ride, set up a predetermined 
course for practice. Make sure they know how to drive and control the 
snowmobile before allowing them to make longer trips. Teach them 
proper snowmobile courtesy, and enroll them in driver’s training and 
safety courses sponsored by local or state organizations.

Summary of Contents for 600 PRO-RMK











































































































































































Reviews: